The speed limitation for IFR flights inside ATS airspace classified as C, when flying below3.050 m (10.000 ft) AMSL, is:4
risposte
A VFR flight when flying inside an ATS airspace classified as C has to maintain the following minima of flight visibility and distance from clouds4
risposte
When on a RNP 1 route is indicated B235 Y, means that all turns shall be made within the allowable RNP tolerance of a tangential arc between the straight leg segments defined with a radius of:4
risposte
Flight Information Service shall be provided to aircraft in order to avoid collision hazards when operating in airspace classes:4
risposte
General provisions - Responsibility for terrain clearanceWho is in general responsible for an ATC clearance to be safe in respect to terrain clearance?4
risposte
Separation methods and minima - vertical separation (non-RVSM)Above flight level FL 290 the Vertical Separation Minimum (VSM) between aircraft flying in the same direction is:4
risposte
Where a 'Secondary Surveillance Radar' (SSR) is not available, radar identification may be achieved by one of the following procedures:4
risposte
When vectoring an aircraft to intercept the localizer course, the final vector furnished shall be such as to enable the aircraft to intercept the localizer course at an angle not greater than:4
risposte
Unless otherwise prescribed by the appropriate ATS authority, the radar controller should notify the non-radar controller when an aircraft making a radar approach is approximately:4
risposte
The separation method whereby the vertical and horizontal separation may be reduced till a maximum of half the standard criteria is called:4
risposte