When on a RNP 1 route is indicated B235 Y, means that all turns shall be made within the allowable RNP tolerance of a tangential arc between the straight leg segments defined with a radius of:4
Answers
Flight Information Service shall be provided to aircraft in order to avoid collision hazards when operating in airspace classes:4
Answers
General provisions - Responsibility for terrain clearance. Who is in general responsible for an ATC clearance to be safe in respect to terrain clearance?4
Answers
Separation methods and minima - vertical separation (non-RVSM)Above flight level FL 290 the Vertical Separation Minimum (VSM) between aircraft flying in the same direction is:4
Answers
Where a 'Secondary Surveillance Radar' (SSR) is not available, radar identification may be achieved by one of the following procedures:4
Answers
When vectoring an aircraft to intercept the localizer course, the final vector furnished shall be such as to enable the aircraft to intercept the localizer course at an angle not greater than:4
Answers
Unless otherwise prescribed by the appropriate ATS authority, the radar controller should notify the non-radar controller when an aircraft making a radar approach is approximately:4
Answers
The separation method whereby the vertical and horizontal separation may be reduced till a maximum of half the standard criteria is called:4
Answers
The air traffic control unit has reported 'radar contact', what does that mean to the pilot?4
Answers
Aircraft flying along the same track may be separated by DME-distances from the same DME and it is confirmed that the aircraft have passed each other. Specify the shortest difference in DME-distance to make it possible for one aircraft to climb or descend4
Answers

Other exam subjects ATPL - Airline Transport Pilot license